Wholesale custom household energy storage battery power wall lithium battery
can powerwall charge from grid?
Time:Oct 31, 2022

can powerwall charge from grid?The manufacturer of ZXDY lithium battery tells you that the answer is yes, why? Explain the three working modes of the wall mounted lithium battery energy storage system (as shown below)

A. Solar priority mode

Under the solar priority mode, the power supply of the load is provided by solar lifepo4 powerwall energy, as shown in the green path in the figure above: when the power generated by solar energy can meet the user's load, the solar energy will supply power to the load, and the excess solar energy will charge the battery pack; When the electricity generated by the solar energy cannot meet the user's load, the load is supplemented by the battery pack; When the remaining capacity (SOC) of the battery is less than or equal to 10%, the system will automatically switch to the mains power to supply power to the load, and will start the mains power to charge the battery, at the same time, the solar energy will charge the battery until the battery is fully charged, after which the system will automatically switch to the solar energy and battery to supply power to the load. When the battery power is seriously insufficient and AC (mains power) is cut off, the system will automatically cut off the load power supply, and the solar energy will charge the battery, SOC will be charged to 40%, and the load power supply will be restarted; If the market power is connected during this process, the system will automatically switch to the mains power to supply power to the load, and will start the mains power to charge the battery, while the solar energy will charge the battery until the battery is fully charged. After the wall mounted battery is fully charged, the system will automatically switch to the solar energy and battery to supply power to the load.
B. AC priority mode
Under AC (mains power) priority mode, the power supply of the load is provided by the mains bypass input: when the battery is sufficient, AC (mains power) only supplies power to the user load; When the battery power is seriously insufficient, the AC (mains power) starts to charge the battery in addition to supplying the user's load, and the solar home battery storage charges the battery until the battery is fully charged; When the AC (mains power) is cut off, the system will automatically switch to the solar energy to supply power to the load. When the power generated by the solar energy can meet the user's load, the solar energy will supply power to the load, and the excess solar energy will charge the lifepo4 powerwall battery pack; When the power generated by the solar energy cannot meet the user's load, the load is supplemented by the battery pack. When the AC (mains power) is cut off and the battery power is seriously insufficient, the system will automatically cut off the load power supply, and the solar energy will charge the battery, SOC will be charged to 40%, and the load power supply will be restarted; If the market power is connected during this process, the system will automatically switch to the mains power to supply power to the load, and will start the mains power to charge the battery, while the solar energy will charge the battery until the battery is fully charged.

C. SE priority mode (peak load shifting mode)

In SE mode, the user can set SE time; During SE time, the power supply of the load is provided by the mains bypass input. At the same time, the mains charge the battery, and the solar charge the battery until the battery is fully charged. Outside the SE time, the load is powered by solar energy. When the power generated by solar energy cannot meet the user's load, the load is supplemented by the battery pack; When the remaining capacity (SOC) of the battery is less than or equal to 10%, the system will automatically switch to the mains power to supply power to the load, and will start the mains power to charge the battery, at the same time, the solar energy will charge the battery until the battery is fully charged, after which the system will automatically switch to the solar liFePo4 lithium Battery to supply power to the load. When the battery power is seriously insufficient and AC (mains power) is cut off, the system will automatically cut off the load power supply, and the solar energy will charge the battery, SOC will be charged to 40%, and the load power supply will be restarted; If the market power is connected during this process, the system will automatically switch to the mains power to supply power to the load, and will start the mains power to charge the battery, while the solar energy will charge the battery until the battery is fully charged. After the battery is fully charged, the system will automatically switch to the solar energy and battery to supply power to the load. For example, if the user sets SE mode, assume that the setting time is 1:00AM-6:00AM, before 1:00AM, the system will be powered by solar energy and batteries; During 1:00AM-6:00AM, the system automatically switches to the mains bypass to supply power to the load, while the mains and solar power charge the battery until the battery is fully charged; Until 6:01 AM, the system will switch back to the way that the load is powered by solar energy and batteries. For countries and regions where electricity prices are measured by time of use, users can set the function of staggered power consumption according to their needs, use the power of the grid during periods when the grid load is low and the price is low, and charge the powerwall 20 kwh battery pack for standby. During the peak load of the grid, the electricity stored in the battery pack is used to achieve the purpose of staggered power consumption and electricity cost saving.

Leave A Message

Leave A Message
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

Home

Products

Contact

whatsapp